No results were found for the filter!
"Exclusive Mini" coffee grounds drawer - JoeFrex Exclusive Dimensions : W x D x H: 14cm x 24cm x 8.5cm This elegant coffee grounds drawer from JoeFrex is a must-have for every professional or amateur barista. Made from polished stainless...
(159.90€ / 1 pc.)
159.90€
3-5 Workdays Article No. 9022
JoeFrex - single sieve for De Longhi This replacement sieve from JoeFrex is compatible with Delonghi Dedica filter holders and all Pavoni Millennium models. Suitable for one cup of espresso and approximately 7g of ground coffee....
(6.80€ / 1 pc.)
6.80€
3-5 Workdays Article No. 9025
JoeFrex - Duble sieve for De Longhi filter holder This replacement sieve from JoeFrex is compatible with Delonghi Dedica filter holders and all Pavoni Millennium models. Suitable for two cups of espresso and approximately 14g of ground...
(6.80€ / 1 pc.)
6.80€
3-5 Workdays Article No. 9024
Wooden cleaning brush for filter holder - JoeFrex This wooden cleaning brush is specially designed for the filter holder brew groups and allows for easy and effective cleaning. The brush is very light and easy to hold. Thanks to the...
(4.60€ / 1 pc.)
4.60€
3-5 Workdays Article No. 9056
Replacement brush head Exclusive - Joe Frex If your Exclusive brush is a little worn, simply replace it with this one. The practical thread makes it easy to screw the brush head on and off.
(3.90€ / 1 pc.)
3.90€
3-5 Workdays Article No. 9066
Barista Microfibre Cloth - by Joe Frex Black microfibre cleaning towel for daily barista use. Whether as a tapping pad, to clean the milk lance or to wipe down your espresso machine. This microfibre cloth is a real all-rounder at your...
(4.49€ / 1 pc.)
4.49€
3-5 Workdays Article No. 9425
Tamper Technic Black 1 . Pressure is adjustable from 8 kg to 21 kg. 2 . Automatic pressure release The tamper is used to press, squeeze, the coffee grind or ground coffee into the portafilter. The quality and taste of the espresso...
58.90€
3-5 Workdays Article No. 9041-htb
JoeFrex Tamper FLAT - 50mm All FLAT bottom parts have a flat "pressing"/tamping surface to compress the coffee grounds. The FLAT tamper bottom part can be combined with all handles! The dimensions of the tamper to be used vary depending...
19.90€
3-5 Workdays Article No. 9013-50-bf
JoeFrex - 58mm Tamper CONVEX All "CONVEX" bases have a slightly convex surface for pressing espresso. Why convex? Normally, the surface of the coffee powder pressed into the filter basket does not play a significant role; whether it is...
20.90€
3-5 Workdays Article No. 9015-58-bc
JoeFrex - 58 mm Tamper KNOCK-CONVEX All KNOCK CONVEX bottom parts have a slightly convex pressing surface to press the coffee grounds. Why the name Knock? After pressing the coffee grounds for the first time, lightly tap (from English...
22.90€
3-5 Workdays Article No. 9052-58-bkc
JoeFrex - 55 mm Tamper KNOCK-CONVEX All the lower parts of KNOCK CONVEX have a slightly convex pressing surface to compress the coffee powder. Why the name Knock? After pressing the coffee powder for the first time, lightly tap on the...
22.90€
3-5 Workdays Article No. 9052-55-bkc
JoeFrex - Tamper Elegance Beech black Thanks to the balanced ratio between handle length and weight, the Elegance fits perfectly in hand and has an elegant appearance. This handle is crafted from turned wood. The black beech handle is...
9.90€
3-5 Workdays Article No. 9049-heb
JoeFrex - 53 mm Tamper KNOCK All KNOCK bottom parts have a flat pressing surface to compress the coffee grounds. Why the name Knock? After pressing the coffee grounds for the first time, lightly tapping on the side of the filter holder...
21.90€
3-5 Workdays Article No. 9047-53-bk
JoeFrex - 57 mm Tamper KNOCK-CONVEX All KNOCK CONVEX bottom parts have a slightly convex pressing surface to compress the coffee grounds. Why the name Knock? After pressing the coffee grounds for the first time, lightly tapping on the...
22.90€
3-5 Workdays Article No. 9052-57-bkc
47 mm Tamper base KNOCK Joe Frex, with patented silicone ring All lower parts of the Tamper KNOCK base series have a flat surface for pressing the espresso.
(21.90€ / 1 pc.)
21.90€
3-5 Workdays Article No. 9047-47-bk
Lower part for press. FLAT base indicates a flat pressing surface. Combinable with all handles!
(19.90€ / 1 pc.)
19.90€
3-5 Workdays Article No. 9013-41-bf
JoeFrex - Tamper Pop black This charming aluminum handle, powder-coated in a sleek black color, adds a fun touch to your daily work routine. To prevent direct contact between the handle and the bottom part of the tamper, a rubber ring is...
10.90€
3-5 Workdays Article No. 9048-hps
Joe Frex Concept Art - Lower part for coffee tamper 58 mm All FLAT tamper lower parts have a flat pressing surface to press the coffee grounds. The FLAT tamper lower part can be combined with all handles! Dimensions of the tamper to be...
19.90€
3-5 Workdays Article No. 9013-58-bf
JoeFrex - 57 mm Tamper FLAT All FLAT bottom parts have a flat pressing surface to compress the coffee grounds. The FLAT bottom part for the tamper can be combined with all handles! The dimensions of the tamper to be used vary depending...
19.90€
3-5 Workdays Article No. 9013-57-bf
JoeFrex - 55 mm Tamper FLAT Bases All subdivisions: FLAT have a flat surface for pressing the espresso. Base FLAT can be combined with all handles! Tamper sizes by manufacturer Here you will find a selection of manufacturers and their...
19.90€
3-5 Workdays Article No. 9013-55-bf
Joefrex - 54 mm Tamper FLAT All FLAT bottom parts have a flat pressing surface to compress the coffee grounds. The FLAT bottom part for the tamper can be combined with all handles! The dimensions of the tamper to be used vary depending...
19.90€
3-5 Workdays Article No. 9013-54-bf
Sturdy Aluminum Tamper, produced with CNC turning technology, 58mm Tamper All lower parts of the Classic series are machined on a CNC lathe until the even fine surface is achieved. Tamper sizes by manufacturer Here you will find a...
9.90€
3-5 Workdays Article No. 9053-58-bca
JoeFrex - 55 mm Tamper Base CLASSIC All the lower parts of the Classic series are machined on a CNC lathe, until reaching a precise flat and uniform surface.
23.90€
3-5 Workdays Article No. 9072-55-bcs
JoeFrex - 57 mm Tamper Base CLASSIC Lower part for espresso tamper, stainless steel. All lower parts of the Classic series are machined on a CNC lathe until a precise flat and uniform surface is achieved
23.90€
3-5 Workdays Article No. 9072-57-bcs
JoeFrex - 54 mm Tamper Base CLASSIC Lower part for tamper, CLASSIC base 54 mm, stainless steel. All lower parts of the Classic series are machined on a CNC lathe until a precise flat and uniform surface is achieved.
23.90€
3-5 Workdays Article No. 9072-54-bcs
JoeFrex - 53 mm Tamper Base CLASSIC, stainless steel All the lower parts of the Classic series are machined on a CNC lathe, until they achieve a precise flat and uniform surface.
23.90€
3-5 Workdays Article No. 9072-53-bcs
Lower part for tamping, CLASSIC 48 mm All the lower parts of the Classic series are machined on a CNC lathe, until they achieve a precise flat and uniform surface.
23.90€
3-5 Workdays Article No. 9072-48-bcs
Flat bottom part of Coffee Tamper - 53mm All bottom parts of FLAT coffee tampers have a flat pressure surface for tamping the coffee ground. The bottom part of the FLAT Tamper can be combined with all handles! The tamper dimensions to be...
19.90€
3-5 Workdays Article No. 9013-53-bf
Lower part for tamper 52 mm All FLAT tamper lower parts have a flat pressing surface to press the ground coffee. The FLAT tamper lower part can be combined with all handles! Dimensions of the tamper to be used vary depending on the...
19.90€
3-5 Workdays Article No. 9013-52-bf
JoeFrex - 57 mm Tamper CONVEX All "CONVEX" bases have a slightly convex surface for tamping espresso. Why convex? Normally, the surface of the coffee powder pressed into the filter basket does not play a significant role; whether it is...
20.90€
3-5 Workdays Article No. 9015-57-bc
JoeFrex - 53 mm Tamper CONVEX All "CONVEX" bases have a slightly convex surface for pressing espresso. Why convex? Normally, the surface of the coffee powder pressed into the portafilter does not play a significant role; whether it is...
20.90€
3-5 Workdays Article No. 9015-53-bc
JoeFrex - 49 mm Tamper KNOCK All KNOCK tamper bases feature a flat pressing surface to compact coffee grounds. Why the name Knock? After the initial coffee ground compression, lightly tapping on the side of the portafilter to dislodge...
21.90€
3-5 Workdays Article No. 9047-49-bk
JoeFrex - 56 mm Tamper FLAT All FLAT bottom parts have a flat pressing surface to compress the coffee grounds. The FLAT bottom part for the tamper can be combined with all handles! The dimensions of the tamper to be used vary depending...
19.90€
3-5 Workdays Article No. 9013-56-bf
Tamper Technic Red 1 . Pressure is adjustable from 8 kg to 21 kg. 2 . Automatic pressure release The tamper is used to press, squeeze, the coffee grind or ground coffee into the portafilter. The quality and taste of the espresso changes...
58.90€
3-5 Workdays Article No. 9041-htr
Tamper Technic Silver 1. Pressure is adjustable from 8 kg to 21 kg. 2. Automatic pressure release The tamper is used to press, squeeze, the coffee grind or ground coffee into the portafilter. The quality and taste of the espresso changes...
58.90€
3-5 Workdays Article No. 9041-hts
JoeFrex - Tamper Pop Pink This charming aluminum handle, powder-coated in a vibrant pop color, adds a fun touch to your daily work routine. To prevent direct contact between the handle and the bottom part of the tamper, a rubber ring is...
10.90€
3-5 Workdays Article No. 9048-hpp